How to Connect a Kopp LED Dimmer? Step-by-Step Guide

Connecting a Kopp LED dimmer may seem complicated, but with the right steps, anyone can do it safely and effectively. As you know, an LED dimmer is specifically designed to dim LED lighting without flickering. However, before you start, it's essential to turn off the power. This prevents electrical shocks and other hazardous situations.

What do you need?

• Kopp LED dimmer

• Screwdriver

• Voltage tester

• Insulation tape

• Dimmer manual

Preparation: Safety first

Before starting the installation, turn off the power at the circuit breaker. Use a voltage tester to ensure the power is off to avoid accidents.

Removing the old switch

• Unscrew the existing switch.

• Note the position of the wires (phase, dim output, neutral wire).

• Carefully remove the switch without damaging the wires.

Connecting the Kopp LED dimmer

1. Connect the phase (L) to the input of the dimmer.

2. Connect the dim output to the lamp.

3. Connect the neutral wire to the neutral connection of the dimmer.

4. Ensure all wires are securely fastened.

Testing the dimmer

Turn the power back on and test the dimmer. If the dimmer works without flickering, the installation is successful. If not, check the connections and LED compatibility.